Clock Thermostat OCD4

Clock Thermostat OCD4 Clock thermostat for electric underfloor heating where optimum comfort temperature and minimum energy consumption are required.

6-Event Clock Thermostat 
     - all-in-one control

An “All-in-one” clock thermostat for electric underfloor heating control where optimum comfort temperature and minimum energy consumption are required.

Green Comfort - Save up to 36% CO2

    

  • Easy animated menu navigation and programming in 8 different languages
  • The programming is now child’s play ensuring the fastest and easiest setup
  • Set and forget! Adaptive control ensuring comfort temperature at the required time
  • Compatible with existing floor sensors, making it the best thermostat for renovation purposes
  • Easy read-out of energy consumption
  • Built-in clock - calendar with power backup
  • Large graphical display
  • The thinnest clock thermostat on the market, only 20 mm, making it easy for the installer
Related
Products
FAQ
  • What does error code "E2" mean?

    Reply

    Error code "E2" means defective, damaged or not connected floor sensor. Check connections or replace sensor if necessary.

  • What is the recommended night setback?

    Reply

    The recommended night setback is max 5°C/41°F

     

     

  • Does the adaptive function reset when making a factory reset?

    Reply

    Yes the adaptive function is reset during a factory reset.

     

     

  • Where to connect the ground wire of floor mats?

    Reply

    The ground wire in the floor mat must be connected directly to the ground wire of the supply.

  • Whom to contact to get info about the total load?

    Question

    When turning on the unit for the first time and choosing Floor thermostat - it asks me for a load.

    Reply

    Ask installer for total load.

  • Installation – Length of sensor cable

    Question

    What is the maximum length of the sensor cable?

    Answer

    In general, it is recommended that the maximum sensor cable length should be 164 feet/50 meters, the length might be shorter. Read the instructions for the precise maximum length.

  • How can I cure the E2 error message?

    Reply

    "E2" means defective, damaged or disconnected floor sensor. Sensor resistance should be 10 or 12 kOhm at 25°C (77°F). The onstruction or quick guide holds informatiom for the specific thermostats.

Green Comfort

Intelligent Control
Green Comfort

Intelligent control results in maximum comfort with low energy consumption.

Products

Floor Heating Electric
FHEL Products

Our room thermostats for electric underfloor heating are recognised for their ideal combination of form and function. View our FHEL product range here.

News

Floor Heating Electric
FHEL News

Find the latest Floor Heating Electric News from OJ Electronics here.

Contact

OJ Electronics
Contact OJ Electronics

Dialogue and close cooperation is the shortest way to a perfect solution.