UTN (Discontinued)

UTN non programmable Thermostat with Built-in GFCI. Optimal comfort in controlling electrical underfloor heating- Built on effciency, intuitive operation and with a stylish design

Non-Programmable Thermostat with Built-in GFCI

OJ Microline® intuitive Non-programmable OJ Microline thermostat with built-in GFCI. Optimal comfort in controlling electrical underfloor heating. Built-in effciency, intuitive operation and with a stylish design

 EFFICIENT, INTUITIVE AND STYLISH

* Industrial Design:     
USA - Design Patent No. D633445
Canada - Design Patent No. D130878

  • Simple user interface and thoughtful installation design
  • Easy to use with no need for use of manual
  • Screw terminals for safe and easy installation
  • Multi voltage: 120 - 240 V (incl. 208 V)
  • Output relay: 15 A
  • Large back-lit display for easy reading
  • Class A GFCI: suitable for wet room installation
Product
Download
Related
Products
FAQ
  • What is the backup time?

    Reply

    The program settings are permanent, the clock will be reset after 2 to 4 hours.

  • How to unlock the child lock?

    Reply

    • From the home screen


       
    • Press "OK" button twice

    • Press button UP and DOWN simultaneously for 3 sec.

    • Unlock Child Lock (MP4)

  • What does error code "E2" mean?

    Reply

    Error code "E2" means defective, damaged or not connected floor sensor. Check connections or replace sensor if necessary.

  • What causes the led to be permantly ON?

    Reply

    Your heat mat or installation between thermostat and heat mat has a fault current to ground. The thermostat has cut off the power for your safety. Please contact your local electrician.

  • What is the recommended night setback?

    Reply

    The recommended night setback is max 5°C/41°F

     

     

  • Does the adaptive function reset when making a factory reset?

    Reply

    Yes the adaptive function is reset during a factory reset.

     

     

  • How to make the USG switch off when the thermostat does?

    Reply

    Check the connections between the two units. If the USG is connected incorrectly to the thermostat, the USG won't switch off.

  • Where to connect the ground wire of floor mats?

    Reply

    The ground wire in the floor mat must be connected directly to the ground wire of the supply.

  • Installation – Length of sensor cable

    Question

    What is the maximum length of the sensor cable?

    Answer

    In general, it is recommended that the maximum sensor cable length should be 164 feet/50 meters, the length might be shorter. Read the instructions for the precise maximum length.

  • How can I cure the E2 error message?

    Reply

    "E2" means defective, damaged or disconnected floor sensor. Sensor resistance should be 10 or 12 kOhm at 25°C (77°F). The onstruction or quick guide holds informatiom for the specific thermostats.

Green Comfort

Intelligent Control
Green Comfort

Intelligent control results in maximum comfort with low energy consumption.

Products

Floor Heating Electric
FHEL Products

Our room thermostats for electric underfloor heating are recognised for their ideal combination of form and function. View our FHEL product range here.

News

Floor Heating Electric
FHEL News

Find the latest Floor Heating Electric News from OJ Electronics here.

Contact

OJ Electronics
Contact OJ Electronics

Dialogue and close cooperation is the shortest way to a perfect solution.